Special Shaped Aluminum Plate-manufacture,factory,supplier from China

Basic InstructionThe aluminum plate of the anode is oxidized and a skinny layer of alumina is shaped at the surface. The anodized aluminum plate improves its hardness and put on resistance, properly warmness resistance, the melting factor of difficult anodized movie is as much as 2320k, first rate insulation, breakdown voltage resistance is as much as 2000V, complements the corrosion resistance, and does now no longer corrode in high-electricity salt spray for hundreds of hours.

Aluminum plates are generally divided into the following two types:1.

Pure aluminum plate (the composition is basically rolled from pure aluminum)Alloy aluminum plate (consisting of aluminum and auxiliary alloys, usually aluminum copper, aluminum manganese, aluminum silicon, aluminum magnesium, etc.)Composite aluminum plate or brazing plate (aluminum plate material for special purpose is obtained by means of composite of multiple materials)Aluminum clad aluminum plate (aluminum plate is coated with thin aluminum plate for special purposes)2.

Basic InstructionMachinabilityThe machinability of aluminum profile is excellent. In various deformed aluminum alloys and cast aluminum alloys, as well as in various states after the production of these alloys, the machining characteristics change greatly, which requires special machine tools or technologies.FormabilitySpecific tensile strength, yield strength, ductility and corresponding work hardening rate dominate the change of allowable deformation.RecyclabilityAluminum has high recyclability, and the characteristics of recycled aluminum are almost the same as that of primary aluminum

Aluminum plate, as its name implies, refers to the plate material made of aluminum profile or aluminum alloy material Or it is a plate-shaped aluminum product aluminum plate produced by heating, rolling and straightening of flat aluminum embryo or aging heat of fixed banyan.1060 Aluminum plate, with an aluminum content of more than 99.6%, is also called pure aluminum plate. It is a commonly used series in the aluminum plate and belt family.

Orange skin pattern and diamond shaped aluminum alloy pattern coil: commonly used for packaging pipes or outer packaging.The orange peel aluminum alloy pattern coil is divided into: Classic orange peel pattern aluminum coil, and variant orange peel pattern aluminum coil (also known as insect pattern). Its surface is similar to orange peel pattern, so it can also be called orange peel pattern aluminum plate.

Aluminum corrugated plate, also known as corrugated aluminum plate, profiled aluminum plate, aluminum tile, etc., is a profiled plate that uses aluminum plate to roll and cold bend into various waveforms. It is suitable for the roofs, walls and interior and exterior wall decoration of industrial and civil buildings, warehouses, special buildings, large-span steel structure houses.

Basic InstructionThe aluminum plate of the anode is oxidized and a skinny layer of alumina is shaped at the surface. The anodized aluminum plate improves its hardness and put on resistance, appropriate warmness resistance, the melting factor of tough anodized movie is as much as 2320k, great insulation, breakdown voltage resistance is as much as 2000V, complements the corrosion resistance, and does now no longer corrode in high-electricity salt spray for lots of hours.

Thickness 0.10mm----10mmWidth 800mm----1900mmColor coated aluminum coil (embossed color coated aluminum coil (polyester): color coated aluminum coil, fluorocarbon color coated aluminum coil)Thickness 0.024-1.2 (mm) width 800-1220 (mm) 1100 1060 3003 5052Pattern plate: material 1060 1100 3003 50521 orange peel pattern aluminum thickness: 0.01-3.0 width 800-1220 (mm) (mm)2 semi spherical pattern aluminum (mm) thickness: 0.1-1.0 width 800-1220 (mm)3 the size of the diamond shaped plate: the thickness of 0.1-2.0 (mm) width 800-1220 (mm)Five rib pat

Thickness 0.10mm----10mmWidth 800mm----1900mmColor coated aluminum coil (embossed color coated aluminum coil (polyester): color coated aluminum coil, fluorocarbon color coated aluminum coil)Thickness 0.024-1.2 (mm) width 800-1220 (mm) 1100 1060 3003 5052Pattern plate: material 1060 1100 3003 50521 orange peel pattern aluminum thickness: 0.01-3.0 width 800-1220 (mm) (mm)2 semi spherical pattern aluminum (mm) thickness: 0.1-1.0 width 800-1220 (mm)3 the size of the diamond shaped plate: the thickness of 0.1-2.0 (mm) width 800-1220 (mm)Five rib pattern: 0.9-8.0 (mm) w

The company's prompt delivery, high quality and low price, service and thoughtful. the special size can be customized according to customer requirements processing, complete specifications, the lowest price, factory direct sales, quality assurance, delivery: seven days or so.Production site: Shandong province Pingyin County village north hole aluminum plantPhone: 15064183919Biography: 0531-87886769Web site: www.sdalcoa.com

Color coated aluminum coil (embossed color coated aluminum coil (polyester): color coated aluminum coil, fluorocarbon color coated aluminum coil)Thickness 0.024-1.2 (mm) width 800-1220 (mm) 1100 1060 3003 5052Pattern plate: material 1060 1100 3003 50521 orange peel pattern aluminum thickness: 0.01-3.0 width 800-1220 (mm) (mm)2 semi spherical pattern aluminum (mm) thickness: 0.1-1.0 width 800-1220 (mm)3 the size of the diamond shaped plate: the thickness of 0.1-2.0 (mm) width 800-1220 (mm)Five rib pattern: 0.9-8.0 (mm) width of 800-1220 (mm0.) c

Our main products as below: 1..Aluminum sheet and aluminum plate Alloy: 1060,1100,1050,1145,8011,3003,3004,5052,5083 ,6061,Thickness:  0.1mm-680mm     Width:   800mm-1900mm2.Aluminum coil/roll Alloy: 1060,1145,1050,1100,8011,3003,3004,5052 ,5083,6061Thickness:  0.10mm-10mmWidth:   800mm-1900mm 3..Aluminum strip   Alloy:1060 1100 8011 3003a.Transformer special aluminum strip: Alloy:1060   temper:0    thickness:0.3-3.0(mm),b.Pipe aluminum strip: alloy 8011 temper:  O 

The main components of the aluminum wafer uncoiling and blanking production line are: loading trolley, uncoiler, leveling machine, feeder, swing unit, special closed single point mechanical press, rapid mold change device, stacking unit, waste cutting, hydraulic system, electrical control system, etc.Technical characteristics of the production line:1. CNC is fully automatic. This production line starts from uncoiling of coiled materials to the completion of blanking of the whole roll of materials.

Basic InstructionThe aluminum plate of the anode is oxidized and a skinny layer of alumina is shaped at the surface. The anodized aluminum plate improves its hardness and put on resistance, true warmness resistance, the melting factor of tough anodized movie is as much as 2320k, terrific insulation, breakdown voltage resistance is as much as 2000V, complements the corrosion resistance, and does now no longer corrode in high-power salt spray for heaps of hours.

The main components of the aluminum wafer uncoiling and blanking production line are: loading trolley, uncoiler, leveling machine, feeder, swing unit, special closed single point mechanical press, rapid mold change device, stacking unit, waste cutting, hydraulic system, electrical control system, etc.Technical parameters of production line:Coil width (mm): 500-1250800-14001000-1600Coil thickness (mm): 0.4-3.0, 1.0-6.0Coil weight (kg): 8000010000Blanking diameter (mm): 85-660, 85-750100-900Blanking times (spm): 40-55Nominal pressure of press (kN): 1250160020002500Alloy stateMost of them are 1-s

1. Five ribbed aluminum alloy checkered plate: five ribbed anti-skid aluminum plate becomes willow shaped checkered plate and aluminum alloy checkered plate. It has good anti-skid ability and is widely used in building (floor) platform design. Because the patterns on the surface of the aluminum plate are arranged in a relatively parallel manner according to the five concave convex patterns, and there are 60 between each pattern and other patterns2. Compass aluminum alloy pattern plate: anti slip aluminum plate, which has the same effect as the five bars, but is not often used.3.

Patterned aluminum plate is a kind of very common aluminum plate, which can be used for decoration in some places and anti-skid in some places. Due to the special treatment process of aluminum plate, in order to protect the aluminum plate from playing a normal role and not affecting the appearance, it should be maintained correctly. Then, how to clean the patterned aluminum plate? How to clean the patterned aluminum plate?In addition to the application of acidic substances on the reaction plate, it is also easy to neutralize this kind of substances on the reaction plate.

Decorative aluminum plate is a kind of material with high cost in construction plate. It is used more in the application field of furniture, such as refrigerator, handle and decorative strip, etc. It will be used in the decorative aluminum plate. The decorative aluminum plate has different classification according to the different plate. According to the different patterns can also be divided.

Electrolytic zinc cathode plateEnergy saving electrolytic zinc cathode plate is composed of aluminum beam, aluminum plate and conductive clamp.

1. Pure aluminum plate: Material: 1050 / 1060 / 1070 / 1100 thickness: 0.1-500mm width: 10-2200mm2. Alloy aluminum plate: Material: 3003 / 5052 / 5754 / 5083 / 6061 / 6063 / 6082 / 7075 / 8011 thickness: 0.2-500mm width: 800-2800mm3. Curtain wall leveling aluminum plate: Material: 1060 / 1100, thickness: 0.95, 1.35, 1.5, 1.85, 2.0, 2.35, 2.5, 2.7, 2.85, 3.0mm, width: 800-1500mm2、 Aluminum coil: | aluminum foilMaterial: 1060 / 1100 / 8011 / 3003 / 3004 / 5052 thickness: 0.1-10mm width: 600-2000mm1.

classificationThe grade of aluminum alloy is representative. The following is an example of 7075T651 aluminum plate grade. The first 7 represents the aluminum and aluminum alloy group - aluminum zinc magnesium alloy. Aluminum and aluminum alloy groups are divided into nine categories.

1. Light weight and high strength Ruiqiao aluminum plate (profiled aluminum plate, corrugated aluminum plate and antique aluminum plate) is made of high-quality aluminum coil material, with a density of only one-third of that of steel, light weight and high strength. 2. Good weather resistance Aluminum plate (profiled aluminum plate, corrugated aluminum plate and antique aluminum plate) has good corrosion resistance, waterproof and moisture-proof, maintenance free and service life of more than 10 years. 3.

Patterned aluminum plate is mainly divided into five rib patterned aluminum plate, pointer patterned aluminum plate, orange peel patterned aluminum plate and bean patterned aluminum plate.The production process of patterned aluminum plate is embossed on the basis of aluminum plate to achieve beautiful effect. Patterned aluminum plate has anti-skid effect According to the different patterns, the pattern aluminum plate can be divided into anti-skid aluminum plate and aesthetic aluminum plate. The following series will explain these two kinds of aluminum plates.1、 Aesthetic.